Medical Casting Material

I found this FAQ on line at http://kidshealth.org/parent/medical/bones/cast_faq.html.

R/

---

• What are the different kinds of casts?: A cast, which keeps a bone from moving so it can heal, is essentially a big bandage that has two layers - a soft cotton layer that rests against the skin and a hard outer layer that prevents the broken bone from moving. These days, casts are made of either:

• Plaster of Paris - a heavy white powder that forms a thick paste that hardens quickly when mixed with water. Plaster of Paris casts are heavier than fiberglass casts and don't hold up as well in water.

• synthetic (fiberglass) material - made out of fiberglass, a kind of moldable plastic, these casts come in many bright colors and are lighter and cooler. The covering (fiberglass) on synthetic casts is water-resistant, but the padding underneath is not. You can, however, get a waterproof liner. The doctor putting on a cast will decide if you should get a fiberglass cast with a waterproof lining.

• How is a cast put on?

First, several layers of soft cotton are wrapped around the injured area. Next, the plaster or fiberglass outer layer is soaked in water. The doctor wraps the plaster or fiberglass around the soft first layer. The outer layer is wet but will dry to a hard, protective covering. Doctors sometimes make tiny cuts in the sides of a cast to allow room for swelling.

• Can Plaster of Paris casts get wet?

Absolutely not! A wet cast may not hold the bone in place because the cast could start to dissolve in the water and could irritate the skin underneath it, possibly leading to infection. So your child shouldn't swim and should use a plastic bag or special sleeve, which is available online or sometimes at pharmacies, to protect the cast from water. And instead of a shower, your child may need to take a sponge bath.

• Can synthetic (fiberglass) casts get wet?

Although the fiberglass itself is waterproof, the padding inside a fiberglass cast is not. So it's still important to try to keep your child's fiberglass cast from getting wet. If this is a problem, talk to your child's doctor about getting a waterproof liner. Fiberglass casts with waterproof liners allow children to continue bathing or even go swimming during the healing process. Although the liner allows for evaporation of water and sweat, it's still fragile. Also, only certain types of breaks can be treated with this type of cast. Your child's doctor will determine if the fracture may be safely treated with a waterproof case.

• What if my child has an itch in the cast?

Try blowing some air in the cast with a hairdryer - be sure to use the cool setting, though. And you should never pour baby powder or oils in the cast to try to relieve your child's itch, or try to reach the itch with a long, pointed object such as a pencil or hanger - these could scratch or irritate your child's skin and can lead to an infection.

• What if the cast gets a crack?

This can happen if the cast is hit or crushed, has a weak spot, or if the injured area begins to swell underneath. Call your child's doctor as soon as you notice a crack. In most cases, a simple repair can be done to the cast without needing to remove it or change it.

• What if the cast is causing my child's fingers or toes to turn white, purple, or blue, or if the skin around the edges of the cast gets red or raw?

The cast may be too tight. Redness and rawness are typically signs that the cast is wet inside, from sweat or water. Sometimes, children pick at or remove the padding from the edges of fiberglass casts. They shouldn't do this, though, because the fiberglass edges can rub on the skin and cause irritation. Call your child's doctor to have the problem fixed right away.

• Why aren't some types of broken bones put in casts right away?

Some kinds of fractures don't need casts to heal. Certain fractures of larger long bones, such as the femur (thighbone), are hard to keep straight in a cast. Although doctors used to commonly put many of these kinds of fractures in traction (a way of gently pulling the bone straight), these days, surgery is often used instead.

• Do all broken bones need casts?

It's not practical to cast ribs and collarbones (clavicles). Even displaced collarbones (in which pieces on either side of the break are out of line) heal well with a sling or special strap called a "figure-of-eight clavicle strap," which the child wears like a vest. Some non-displaced finger and toe fractures (in which the pieces on either side of the break line up) that don't involve the joint or the growing part of a child's bone (called the growth plate) may heal well with a splint or buddy taping (taping the adjacent unaffected finger or toe).

• Will my child feel pain when the broken bone is in a cast?

Some pain is expected for the first few days, but it's usually not severe. Your child's doctor may recommend acetaminophen or ibuprofen to ease your child's pain.

• How are casts taken off?

The doctor will use a small electrical saw to remove the cast. Although it may look and sound scary to your child, the process is actually quick and painless. The saw's blade isn't sharp - it has a dull, round blade that vibrates up and down. The vibration is strong enough to break apart the fiberglass or plaster, but shouldn't hurt your child's skin and may even tickle.

• What will the injured area look and feel like when the cast is removed?

Once the cast is off, the injured area will probably look and feel pretty weird to your child: The skin will be pale, dry, or flaky; hair will look darker, and the area (muscles especially) will look smaller or weaker. Don't worry, though - this is all temporary. And depending on the type and location of your child's fracture, the doctor may also give your child special exercises to do to get the muscles around the broken bone back in working order.

---

• Casting supplies can be purchased at almost any Orthopedic supply store without a license.

• After washing and thoroughly drying your patients' skin, wrap the area with Webril Undercast Padding. Put a roll of casting material in a bucket of warm water until it becomes soft. Wrap it around the Webril and allow it to dry. The plaster of Paris is exothermic, which means that it generates heat while it is drying.

• Placing your 'patient's leg' in an orthopedic cast has certain nonsexual advantages. You get a chance to go to the head of the line at the movies. <G>

Jump to: Main Page • Micropedia • Macropedia • Icons • Time Line • History • Life Lessons • Links • Help
Chat rooms • What links here • Copyright info • Contact information • Category:Root